Advertisement
3
Installing your appliance
3.4 Chimney assembly
3.4.1 Upper chimney
Slightly widen the two sides of the upper
chimney and hood them behind the mounting
brackets, ensuring that they are well seated.
Secure the sides of the brackets using 4 screws
(M3 X 12).
3.4.2 Lower chimney
Slightly widen the two sides of the chimney and
hook them between the upper chimney and the
wall, ensuring that they are well seated.
Fix the lower parts laterally to the hood body
using 2 screws (ST4 X 8).
3.5 Ducted vs. Recirculation
mode
You can choose to install the hood as a ducted or
recirculation mode
Ducted mode (Vented mode)
In the ducted mode, air is drawn into the hood, fat
are trapped by aluminum filters. Odors, fumes and
condensation are then expelled to the outside.
Cooker Hood / User Manual
In this mode, only the aluminum filters are in-
stalled.
Recirculation mode
In the recirculation mode, air is drawn into the
hood, fats are trapped by the filters, the air then
passes through charcoal filters to remove cooking
odors, the purified air is then passed back into the
kitchen. In this mode, both the aluminum filters
and the charcoal filters must be installed.
3.6 Installation of the oil
collector
11 / 14 EN
Advertisement
