Toyota Supra 1997 Manual page 42

1. Add slack to the shoulder belts by
pulling both of them together while
pulling the black seat belt release
strap (see step 4 for illustrated
instruction). Then pull down the
seatback part of the removable pad.
Determine the proper shoulder belt
slot height for your child. Select the
slots at or just above the top of the
child's shoulders.
The removable pad is attached by fasten-
er tapes.
44
WWW.MANUALS.WS
CAUTION
!
If you have removed the child seat
pad for cleaning etc., do not use the
built-in child restraint without the
pad.
WWW.MANUALS.WS
To move the shoulder belts from the lower
slot to the upper slot:
1. Slide the belt up tp the top of the seat-
back.
2. Slide the belt down to the outer side of
the upper slot.
3. Squeeze the remaining edge of the
seat belt down into the inner side of the
upper slot.
You may have to push some belt material
through the slot in order to move the belt.
To move the belt to the lower position, re-
verse this procedure.