Table of Contents
Advertisement
5. Disconnect the signal cable and the power cable from the rear of the optical drive, and then remove the
screw that secures the optical drive.
Figure 10. Removing the screw that secures the optical drive
6. Slide the optical drive out of the front of the computer.
Figure 11. Removing the optical drive
7. Hold one end of the optical drive cover and remove it from the optical drive as shown.
Figure 12. Removing the optical drive cover
8. Take the new optical drive out of the static-protective package by its sides.
9. Hold one end of the optical drive cover and install it on the optical drive.
10. Slide the new optical drive into the front of the computer.
11. Align the screw hole in the new optical drive with the corresponding hole in the hard disk drive bracket.
Then, tighten the screw to secure the new optical drive in place.
12. Connect the signal cable and the power cable to the new optical drive.
84
Lenovo S500 Hardware Maintenance Manual
Advertisement
Table of Contents
