Figure 22. Remove the coin-cell battery
Refer to "Major FRUs and CRUs" on page 24 to look up details about the following replacement part:
Coin-cell battery
Remove the memory modules
Make sure the following FRUs (or CRUs) have been removed.
"Remove the service door" on page 30
"Remove the Solid State Drive (SSD)" on page 30
"Remove the Hard Disk Drive (HDD)" on page 32
"Remove the lower case" on page 35
"Remove the battery pack" on page 36
Step 1.
Remove the memory module shielding.
Figure 23. Remove the memory module shielding
Step 2.
Release the two latches on both edges of the socket at the same time. Then, remove the memory
modules.
1
.
Chapter 4
Removing a FRU or CRU
39