Step 1.
Disconnect the battery pack cable from the system board. Then, remove the memory shielding.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 5. Remove the memory shielding
Go to
https://support.lenovo.com/partslookup
replacement part:
Memory shielding
Remove the memory modules
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the memory shielding" on page 29
Step 1.
Open the latches and remove the memory modules.
30
Lenovo Legion Pro 5i (16", 8) and Lenovo Legion Pro 5 (16", 8) Hardware Maintenance Manual
to look up the Lenovo part numbers of the following