Advertisement
Install the rear rack
Loosen two bolts on the two side of rear rack (position 1), but do not to remove them at all
1.
Take out the screws on the accessory box, align the frame mounting holes with mounting holes in front of
2.
therear rack, tighten two bolts (position 2) on the two side of rear rack with 4mm Allen wrench.
3.
Tighten the bolts (position 1) on the both side.
Locate the tail light connector, carefully press directly together without twisting.
4.
Check that the four rear rack bolts are fully secured.
5.
Set the seat height
Advertisement
