Download Print this page

Battery Charging - HJM JOYRIDER Owner's Manual

Advertisement

Battery Charging

Charging will be indicated by the charge status light:
Red light indicates that the battery's charging; Green
light indicates that the battery's fully charged. You can
also see the charging status on LCD display.
There is a USB port on the battery, which can be used
to charge your phone or other electronic product.
Charging Procedure
1. Check the charger, charger cables and battery for damage before each charge.
2. Always charge in a safe place with suitable environment.(as stated below)
3. The battery can be charged both when it is located inside of the frame or when you take it out of the frame.
When battery is located inside of the frame:
a. Turn ebike power off.
b. Locate charging port on the left side of the frame and remove the rubber cover.
c. Plug the charger into the charging port first; then connect it to a power outlet (AC 180V-240V, 47-G3H7).
When the battery is outside of the ebike:
a. Use the key to unlock battery and pull it out of the frame.
b. Place battery in a secure place and plug the charger into the charging port first; then connect it to a power
outlet (AC 180V-240V, 47-G3H7).
c. Unplug the charger from the outlet, then the charging port.
d. After full charge, remember to put the battery back into the frame and most importantly lock it with the key.
21
NOTICE
When Installing the Battery into the Bike
• Do not force the battery onto the battery mount; carefully align and gently push the battery down onto the mount.
• Ensure that the battery has been properly secured to the bike before each use. Verify that the battery is in a
locked position.
When Charging
• A safe place with suitable environment should be cool, dry and indoors away from direct sunlight, dirt, or
debris. And it is away from potential to strip on the charging cords and possible damage to the bike, battery,
or charging equipment while parked and/or charging. Always charge the battery when the surrounding
temperature is between 10°C-25°C (50°F-77°F).
• Ensure that the battery and charger are not damaged before charging. If you notice anything unusual while
charging or experience substantial reduction in range, please stop charging and usage of the bike.
• Charging the battery normally takes 3-7 hours. The charging time varies depending on distance travelled,
riding characteristics, terrain, payload, battery age, etc.
• Remove the charger from the battery within one hour after the indicator light turns green. The charger is
designed to automatically stop charging when the battery is full, but unnecessary wear of the charging
components could occur if the charger is left attached to the battery and a power source for longer than 12
hours. Detach the charger within one hour, or as soon as possible, once the green light indicates a complete
charge to avoid unnecessary wear of charging components.
• Never charge a battery for more than 12 hours at a time.
• Do not leave a charging battery unattended.
• The battery should be recharged after each ride so that it is ready to go full range for the next ride.
22

Advertisement

loading

This manual is also suitable for:

Joyrider step thru