Lexmark MX810dfe User Manual page 179

Understanding the printer menus
Use
LDAP Certificate Verification
Demand
Try
Allow
Never
Minimum PIN Length
1–16
Confidential Print menu
Use
Max Invalid PIN
Off
2–10
Confidential Job Expiration
Off
1 hour
4 hours
24 hours
1 week
Repeat Job Expiration
Off
1 hour
4 hours
24 hours
1 week
Note: Off is the factory default setting.
To
Allow the user to request a server certificate.
Notes:
•
"Demand" is the factory default setting. This means a server certificate is
requested. If a bad certificate is provided or if no certificate is provided,
then the session is terminated immediately.
•
"Try " means a server certificate is requested. If no certificate is provided,
then the session proceeds normally. If a bad certificate is provided, then
the session is terminated immediately.
•
"Allow" means a server certificate is requested. If no certificate is
provided, then the session proceeds normally. If a bad certificate is
provided, then it will be ignored and the session proceeds normally.
•
"Never" means no server certificate is requested.
Limit the digit length of the personal identification number (PIN).
Note: 4 is the factory default setting.
To
Set a limit on the number of times an invalid PIN can be entered.
Notes:
•
This menu item appears only when a formatted, working printer hard disk is
installed.
•
When the limit is reached, the print jobs for that user name and PIN are
deleted.
Set a limit on how long the printer stores confidential print jobs.
Notes:
•
If the "Confidential Job Expiration" setting is changed while confidential print
jobs reside in the printer memory or printer hard disk, then the expiration time
for those print jobs does not change to the new default value.
•
If the printer is turned off, then all confidential jobs held in the printer memory
are deleted.
Set a limit on how long the printer stores print jobs.
179