THANK YOU FOR CHOOSING JBL For more than 50 years, JBL We’re confident that the Please take a moment to has been involved in every JBL loudspeakers you have register your product on our aspect of music and film chosen will provide every Web site at www.jbl.com.
Page 3
MODELS SP5, SP6, SP8 AS REAR SPEAKERS 5 – 6 ft. WALL WALL WALL WALL MODELS SP6C, SP6CS, SP8C IN CEILING ble, they may be placed in a the other toward the right of the wall (or in the ceiling) behind listening position, aimed at ear- the listening position, facing for- level height.
SPEAKER CONNECTIONS CONNECTION TIPS The wires for both speakers the correct polarity remains should be the same length. If equally important in order to one speaker is placed closer to preserve the proper ambience the amplifier than the other, and directionality of the hide the excess wire behind program material.
EXISTING CONSTRUCTION SP5, SP6, SP8 ≥1/2" ≥1/2" ≥1/2" Remove the grille from the Determine the correct speaker Note: Always allow at least speaker frame by pulling on location. one-half inch between a wall the paper tab. If the tab is Note: Remove the inner template, stud and the speaker cutout or missing, to avoid scratching...
Page 6
EXISTING CONSTRUCTION SP6C, SP6CS, SP8C ≥1/2" ≥1/2" ≥1/2" Remove the grille from the Determine the correct speaker Cut the drywall. speaker frame by pulling on location. Note: Always allow at least the paper tab. If the tab is Note: Remove the inner template, one-half inch between a wall missing, to avoid scratching which is the paint shield, at the...
NEW CONSTRUCTION You will need to purchase the correct rough-in frame kit for your model: SPEAKER MODEL ROUGH-IN FRAME KIT RIF5 RIF6 SP6C and SP6CS RIF6C RIF8 SP8C RIF8C Detailed installation instructions are supplied with the rough-in kit. PAINTING THE SPEAKER FRAME AND GRILLE SoundPoint Series loud- baffle.