Table of Contents
Advertisement
B. Securing Stove Pipe/Liner to Flue Collar
1. There are 4 already drilled holes in the flue collar 90
degrees apart. Attach the flue collar to the stove pipe/
liner. If the seal is questionable use high temperature
sealant such as stove mastic (Figure 19.1).
2. Attach gasket to bottom side of flue collar with a thin
coat of silicone.
Flue Collar
Figure 19.1
C. Leveling Legs
1. Remove the 2 screws already installed on each leg.
2. Move legs to the desired height.
3. Re-install the screws to secure in place.
Remove 2 screws from both sides.
Adjust the legs up or down to level
appliance.
Figure 19.2
January 10, 2020
Gasket
Stove Pipe/Liner
D. Securing Appliance to Stove Pipe/Liner
1. Once you have the appliance in place and secured,
reach up through the flue opening and grab the
attachment bar and pull down inside flue opening
(Figure 19.3).
2. Insert the 5/16 bolts inside the cast flue and through
the chimney mounting bar. Securely tighten the nuts.
Fasteners are provided.
3. Re-install the tube channel assembly, baffle board,
ceramic blanket and baffle protection channel.
Attachment
Bar
Figure 19.3
7045-910I
4100 Insert ACC
5/16 Bolts
5/16 Nuts
19
Advertisement
Table of Contents
