Honeywell HC09CESAWK User Manual page 24

TROUBLESHOOTING GUIDE (CONTINUED)
PROBLEM POSSIBLE CAUSE
The Hose is detached.
Temperature setting is
too high.
Unit runs but is Air outlet or intake is
not cooling blocked.
Room exceeds
recommended size.
Large size or number of
windows are decreasing
cooling effectiveness.
Unit will not
run and Power
Excess water condensate
button is
inside
blinking
the Tank.
(water full
indicator)
SOLUTION
Reinstall Hose properly
(refer to Installation section).
Reduce temperature setting on control panel.
Remove blockage.
Move unit to smaller room.
Cover windows with curtains or blinds.
Drain the water (refer to Water Condensation
Drainage).
EN 16