Safety - Husqvarna LC 141iV Operator's Manual

(Fig. 24)
(Fig. 25)
Start procedure for
(Fig. 19)
model LC 141C: loosen
start inhibitor, push
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
12
Recycle this
product at a re-
cycling location
for electrical
and electronic
equipment. (Ap-
plies to Europe
only)
Start procedure
for model
LC 141iV/
LC 141i: push
ON/OFF button,
loosen start in-
hibitor, push
motor brake
handle down.
Used if there is a risk of
Used if there is a risk of
motor brake handle
down.
Release motor brake
(Fig. 20)
handle to stop.
Slow
(Fig. 21)
Fast
(Fig. 22)
(Fig. 23)
Scannable code
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

General safety instructions
WARNING: Read the
warning instructions that
follow before you use the
product.
• This product is dangerous if
used incorrectly or if you are
not careful. Injury or death can
occur if you do not obey the
safety instructions.
919 - 011 - 16.08.2023