Miele G 1 Series Manual page 44

Technical Information
Function
Changing the main menu
Save extras
System lock activation
(G 2830 only)
In-operation lock
(G 2830 only)
Setting the temperature
format
Activating/deactivating
the buzzer
Activating/deactivating
the confirmation tone
Brightness adjustment
Contrast adjustment
Activating/deactivating
standby
(G 2830 only)
Activating/deactivating
the memory
Activating the dealer
demo mode
Programming
Select Change main
menu. Select a wash
program for position 1,
press Continue, and do
exactly the same for
positions 2 and 3. After all
changes have been made,
confirm with Finished and
return to the main menu.
Select Save extras.
Select a setting and
confirm with OK.
Select System lock. Make
the desired selection and
confirm with OK.
Select In operation lock.
Make the desired selection
and confirm with OK.
Select Temperature.
Select a format and
confirm with OK.
Select Buzzer.
Select a setting and
confirm with OK.
Select Keypad tone.
Select a setting and
confirm with OK.
Select Brightness. Select
a setting and confirm with
OK.
Select Contrast. Select a
setting; confirm with OK.
Select Standby. Make the
desired selection; confirm
with OK.
Select Memory. Select a
setting; confirm with OK.
Select Dealer. Select a
setting; confirm with OK.
44
G 1xxx/G 2xxx
Display
The display shows the programs
available. The order of the first
three can be modified. After fixing
and confirming a new order, the list
is shown again.
This function is activated in the
standard settings. In the display,
this is signaled with the message
On. If you do not wish to save,
select Off.
This function is deactivated as
standard. This is indicated in the
display by Off. If the function is
desired, select On.
The display shows the setting
options Permitted and Not
possible.
The temperature can be displayed
in °C or °F as desired.
The options Off, Normal and Loud
are shown in the display.
In the standard settings, the
confirmation tone in the form of an
acoustic signal is activated when a
button is operated. The display
indicates this with On. To switch off
the confirmation tone, select Off.
17 levels, with level 8 as the
standard setting. Brightness levels
are displayed in bar form.
17 levels, with level 8 as the
standard setting. Contrast levels are
displayed in bar form.
Options: On and Not in current
program.
Options: On (standard setting) and
Off. With the memory function
activated, the last selected program
can be saved.
For options, see Section 2.13.