English BREAKER D25911 Congratulations! Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain You have chosen a D WALT tool. Years of experience, thorough the tool and the accessories, keep the hands warm (relevant...
English GENERAL POWER TOOL SAFETY WARNINGS The Supply of Machinery (Safety) Regulations, 2008, S.I. 2008/1597 (as amended), WARNING: Read all safety warnings, instructions, EN62841‑1:2015 +A11:2022, EN IEC 62841‑2‑6:2020 +A11:2020. illustrations and specifications provided with this These products conform to the following UK Regulations: power tool.
Page 7
English c ) Prevent unintentional starting. Ensure the switch h ) Keep handles and grasping surfaces dry, clean and is in the off position before connecting to power free from oil and grease. Slippery handles and grasping source and/or battery pack, picking up or carrying surfaces do not allow for safe handling and control of the the tool.
English • Do not strike jammed bits with a hammer to dislodge • Risk of personal injury due to prolonged use. them. Fragments of metal or material chips could dislodge SAVE THESE INSTRUCTIONS and cause injury. Electrical Safety • Make sure that there are no power or gas lines in the work area.
English Date Code Position (Fig. A) Mounting the Bail/Loop Style Auxiliary Handle (Fig. B) The production date code consists of a 4‑digit year followed 9 by a 2‑digit week and is extended by a 2‑digit factory code. 1. Widen the ring opening 11 of the bail/loop style auxiliary handle ...
English Service Indicator LED (Fig. A) Dust Extraction System (Fig. G) Your breaker has yellow service indicator LED 10 , to indicate The use of a dust extraction system (DWH051) is recommended when service is required. Refer to the table for more information to reduce potentially harmful airborne dust and to prolong tool on LED functionality.
English Transport 4. Fit and adjust the bail/loop style auxiliary handle 5 make sure it is firmly tightened. CAUTION: Accidental starting during transport! 5. Hold the tool with main handle and switch on. The tool now runs in continuous operation. • Always transport your tool with removed battery or iMPORTAnT: AlWAYs use two hands when operating the disconnected power supply cord.
English TROUBLESHOOTING GUIDE BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns For assistance with your product, visit our website at www.dewalt.com for a list of service centres. PROBlEM POssiBlE CAUsE sOlUTiOn Tool will not start. The extension cord and/or plug is defective.
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg enduser.BE@SBDinc.com Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)