Clean The Display - Philips PP27QHD Instructions For Use Manual

7 Clean the display

Clean the display using a sponge, cleaning cloth or soft tissue, lightly moistened with a
recognized cleaning product for medical equipment. Read and follow all label instructions on
the cleaning product. In case of doubt about a certain cleaning product, use plain water.
Only use the following cleaning and disinfection agents:
• 70% isopropyl alcohol
• 1.6% aqueous ammonia
• Cidex® (2.4% glutaraldehyde solution)
• Sodium hypochlorite (bleach) 10%
• "Green soap" (USP)
• 0.5% Chlorehexidine in 70% isopropyl alcohol
• Like Cleansafe® optical cleaning liquid
Never use the following products:
• Alcohol/solvents at higher concentration > 70%
• Strong alkalis lye, strong solvents
• Acid
• Detergents with fluoride
• Detergents with ammonia at higher concentration > 1.6%
• Detergents with abrasives
• Steel wool
• Sponge with abrasives
• Steel blades
• Cloth with steel thread
CAUTION
Take care not to damage or scratch the front glass or LCD. Be careful with rings or other
jewelry and do not apply excessive pressure on the front glass or LCD.
CAUTION
Do not apply or spray liquid directly to the display as excess liquid may cause damage to
internal electronics. Instead, apply the liquid to a cleaning cloth.
CAUTION
When cleaning, avoid spilling liquid over the light sensor and avoid strong pressure on it.
PP27QHD Display MMPC-4227F1
Clean the display
23