Use And Operation; Control Panel; Button Functions - Honeywell FFP21996 User Manual

USE AND OPERATION

Control Panel

Front Panel:
A) Power Button
B) LED Guide Light
C) Speaker
D) Light Indicator
Back Panel:
A) Charging Port

Button Functions

Power button:
When first turning on the Tracker, or the first time turning it on after the device
has been reset, press and hold the power button for 6 seconds until the blue
light indicator is flashing repeatedly. While the blue light is in flashing,
the Wi-Fi connection is active and it is ready to be connected to the
Honeywell Smart Pets App. If the device is not connected to the App within
5 minutes, it will automatically exit pairing mode (blue light will stop flashing).
If your Tracker has already been connected to the App but is powered off,
hold down the power button for 6 seconds until the blue light indicator flashes
3 times then stops. You will then see your Tracker as, "Active" within the App,
allowing access to Tracker data and App controls.
B
A
EN 6
D
C
Front
A
Back