Connecting Your Subwoofer; Default Settings - ELAC VARRO Premium Series Owner's Manual

Connecting your Subwoofer

Premium Subwoofer Series
1938 N. Batavia St. Suite K
Orange, CA 92865
Fraunhoferstraße 16
24118 Kiel, Deutschland
www.elac.com
VOLUME
SERVICE
RESET
LINE IN
LEFT RIGHT/LFE
T2.5A L 250V
100-120/220-240 VAC
50/60Hz 2.5A
POWER
ON
OFF
1. If using an AV receiver with a subwoofer output connect a single RCA cable
from the subwoofer out to the Right/LFE input on the subwoofer.
2. If your receiver, pre-amp, or integrated amplifier does not have a dedicated
subwoofer output connect a set of stereo RCA connectors from the pre-outs
(variable) from your pre-amp and integrated amp to the rca inputs on the
subwoofer.
3. Turn on power switch to "ON" position

Default Settings

1. Volume 75%
2. Low pass at 70 Hz @ 12 dB
3. Preset defaulted to Music
Premium Subwoofer PS250, PS350, PS500 | www.elac.com
Model : PS250-BK
SERIAL NUMBER
CONT AINS FCC ID: A8TBM70ABCDEFGH
CONT AINS IC ID: 12246A-BM70BLES1F2
CAN ICES-3(B)/NMB-3(E)
Desinged by Elac
Made in China
Front
AVR
Pre-Amp / Integrated Amp
Front Front
Subwoofer
Page 3