Panasonic LJ-SK56A User Manual page 18

8-5 Daylight-saving Time Setting
• If the daylight-saving time setting is set to ON, the internal time is one hour earlier. Switch the setting OFF after
daylight-saving time has ended. If it is switched OFF, the time will be one hour behind than when it is ON.
* When linked with the network adaptor, the date/time data is obtained automatically from a server. The daylight-saving time
setting will therefore be ignored.
■
Operation
• Refer to 8-1 to select the daylight-saving time setting in the user setting mode [no- 4].
• Pressing "MENU (ENTER)" will switch to the display mode. The current daylight-saving time setting will be
displayed.
• Press "MENU (ENTER)" in the display mode to switch to the setting mode. The current setting will blink.
• Press "DATA (▲)" and "CLOCK (▼)" to enable/disable the daylight-saving time setting.
• Press "ON/OFF (CANCEL)" to cancel the setting and switch to the display mode.
• Press "MENU" to set the data and switch to the display mode. Or pressing "ON/OFF (CANCEL)" to cancel the
setting and switch to the display mode.
• Press "ON/OFF (CANCEL)" in the display mode to return to the User setting mode [no-4].
User Setting Mode
Daylight-saving Time Setting
8-6 Child Lock Setting
• This setting allows you to make the key commands for starting/stopping the operation more complex, in order to
prevent failure caused by tampering. If the child lock setting is set to ON, the key commands required to start/stop
the operation will change as described below.
■
Operation
0
1
2
3 4
1
5
Start/Stop
6
7
8
• Refer to 8-1 to select the child lock setting in the user setting mode [no- 5].
6
9
• Pressing "MENU (ENTER)" will switch to the display mode. The current child lock setting will be displayed.
• Press "MENU (ENTER)" in the display mode to switch to the setting mode. The current setting will blink.
• Press "DATA (▲)" and "CLOCK (▼)" in the setting mode to enable/disable the child lock setting.
• Press "MENU" to set the data and switch to the display mode. Or pressing "ON/OFF (CANCEL)" to cancel the
setting and switch to the display mode.
• Press "ON/OFF (CANCEL)" in the display mode to return to the User setting mode [no-5].
User Setting Mode
Child Lock
Notice:
* When "Child lock" is on, it is necessary to take time to operate changing mode.
Daylight-saving Time Setting
Show the
current setting
Child Lock OFF
"ON/OFF (CANCEL)"
Press for one second
Child Lock Setting
Display Mode
or
"ON/OFF (CANCEL)" + "MENU (ENTER)"
Press for one second
Display Mode
Show the
current setting
or
Setting Mode
Set ON and OFF with the
" " " "
DATA (▲) CLOCK (▼)
Child Lock ON
Setting Mode
Set ON and OFF with the
" " " "
DATA (▲) CLOCK (▼)