Panasonic LJ-SK56A User Manual page 16

Hide thumbs Also See for LJ-SK56A:
Table of Contents

Advertisement

8-3 Lower Discharge Limit Setting
• In the lower discharge limit setting, you can set the lower discharge limit value for the off-line system for daily use.
* If you wish to use the battery system for a longer period during power failure, you are advised to set a higher value for the
lower discharge limit.
* If you are using a
If the on-line is enabled, the system will operate with the lower discharge limit command from the programs.
Operation
• Refer to 8-1 to select the lower discharge limit setting in the user setting mode [no- 2].
• Press "MENU (ENTER)" to switch to the display mode in the lower discharge limit setting.
The current lower discharge limit setting of the system is displayed in the display mode.
• Press "MENU (ENTER)" in the display mode to switch to the setting mode.
• Press "DATA (▲)" and "CLOCK (▼)" while the
• Press "MENU (ENTER)" to complete the setting and switch to the display mode. Or press "ON/OFF (CANCEL)"
to cancel the setting and switch to the display mode.
• Press "ON/OFF (CANCEL)" in the display mode to return to the User setting mode [no-2].
User Setting Mode
Lower Discharge
Limit Setting
Setting a small value for the lower discharge limit may shorten the storage battery discharge time during power failure.
0
1
Furthermore, the discharge times may become shorter when the battery temperature is lower.
2
3
4
The discharge times change depending on the remaining battery level and the operation period of the system,
1
when the device was installed.
5
6
7
Lower Discharge Limit Value
8
6
[%]
9
40
20
* When the remaining battery level is low, the storage battery system can not supply 2.0kW power.
on-line system, the specified lower discharge limit will only take effect when the on-line is disabled.
Lower Discharge Limit Setting
Load Capability
character display is blinking to change the setting value (0-40%).
Display Mode
Show the
current setting
[KW]
*
2.0
1.0
*
2.0
1.0
The character display will blink.
Setting Mode
or
or
Discharge Time
Max. 1.5 hours
Max. 3 hours
Max. 0.75 hours
Max. 1.5 hours

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lj-na02

Table of Contents