Table of Contents
Advertisement
Available languages
Available languages
FRAMELESS CABINET
Refer to the marking on the brackets to determine
the correct installation side and orientation.
7/64"
Align the corresponding bracket to the cabinet
side, while placing rear end of bracket against
the wall. Draw a line on the outer edge of the
bracket (as shown).
Slide the bracket towards the center of cabinet
and align the outside edge of the bracket with the
marked line, keeping the rear end edge leaning
on the wall.
3 X
12
Use a pencil to mark 3 holes.
Remove the bracket. Using a 7/64" drill bit,
drill 3 holes where marked.
Assemble the bracket to the cabinet bottom using
a Phillips screwdriver and 3 provided countersunk
wood screws. Repeat for the other cabinet side
.
Advertisement
Chapters
Table of Contents
