Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Aerpro Manuals
  4. Car Receiver
  5. AERA10D
  6. Manual

Aerpro AERA10D Manual

Radio replacement kit
Hide thumbs Also See for AERA10D:

Advertisement

Quick Links

Download this manual
AMHGM1K
Introduction and Features
The AMHGM1K is a complete radio replacement kit for the installation of the Aerpro AERA10D modular radio in Chevrolet Silverado
and GMC Sierra trucks. All modules, cables and adapters are included to retain important features of the factory system, including:
front and rear park assist, warning chimes, factory reverse camera, steering wheel-mounted radio controls and AM/FM reception.
Plug & Play wiring harnesses allow for quick and easy installation without the need to cut or splice any wiring. The display mounting
panel allows flush mounting the 10 inch display without modifying/cutting any part of the vehicle's sub-dash.
Important Notes
We recommend reading this manual thoroughly to familiarize yourself
with the entire process prior to beginning the installation.
1. Does not retain the following factory features:
● Factory satellite radio
● Rear seat entertainment system (RSE)
● Steering wheel control backlighting
● Factory USB Ports
2. Not compatible with vehicles equipped with Bose amplified audio system.
3. Please make your vehicle settings selections before removing the factory radio for optimal installation time.
Recommended Tools
Plastic Panel Tool
7mm Socket
10mm Socket
Included Components
1. AERA10D Display Mounting Panel
2. Dual USB Extension (SSUSB2)
3. AM / FM Antenna Adapter (BAA22)
4. Main Harness (AMHGM1K-HAR-A)
5. Vehicle Side Harness B (AMHGM1K-HAR-B)
6. Vehicle Side Harness C (AMHGM1K-HAR-C)
7. Radio Replacement Interface (RP5-GM51)
8. Steering Wheel Control Harness (GM5LIN-SW-HAR)
9. Factory Rear Camera Adapter (CAM-GM51)
10. IOB Display Harness (GM5CAM-DIS-HAR)
11. Chime Module (CMX)
12. Differential Video Adapter (RPA-VA1)
NOTE: Along with the AMHGM1K components,
additional hardware and wire harnesses from the
AERA10D (UN1810E) kit will also be used in the
installation.
Ratchet
Torx T15 Screwdriver
Small Flat-blade Screwdriver
AERPRO AERA10D Radio Replacement Kit
for select 2014-2019 Silverado/Sierra Truck
Pick Tool
Wire Feeder
1
2
8
7
11
6
5
4
3
10
9
12
Page 1

Advertisement

loading

Related Manuals for Aerpro AERA10D

Summary of Contents for Aerpro AERA10D

  • Page 1 Introduction and Features The AMHGM1K is a complete radio replacement kit for the installation of the Aerpro AERA10D modular radio in Chevrolet Silverado and GMC Sierra trucks. All modules, cables and adapters are included to retain important features of the factory system, including: front and rear park assist, warning chimes, factory reverse camera, steering wheel-mounted radio controls and AM/FM reception.

  • Page 2: Wiring Overview

    AMHGM1K AERPRO AERA10D Radio Replacement Kit for select 2014-2019 Silverado/Sierra Truck Wiring Overview CAM-GM51-HAR CAM GM51 INPUT GM5LIN-SW-HAR SR-GM14H-HAR-B SR-GM14H-HAR-B SWC INPUT 6PIN RADIO 16PIN RADIO REVERSE CAM RPA-VA1 SR-GM14H-HAR-A DAB+ chime module Antenna CMX CHIME USB1 USB2 6PIN 10PIN...

  • Page 3: Section 1: Disassembly

    AMHGM1K AERPRO AERA10D Radio Replacement Kit for select 2014-2019 Silverado/Sierra Truck Factory Radio Code Before starting, determine the vehicle’s factory audio system by referencing the Service Parts Identification sticker inside the upper glove box. One of these RPO codes will be listed:...
  • Page 4 AMHGM1K AERPRO AERA10D Radio Replacement Kit for select 2014-2019 Silverado/Sierra Truck Section 1: Disassembly (cont.) Part One: Center Dash Disassembly (cont.) Step 4 Remove the three 7mm screws securing the air vent on the left side of the radio opening and remove the vent.
  • Page 5 AMHGM1K AERPRO AERA10D Radio Replacement Kit for select 2014-2019 Silverado/Sierra Truck Section 1: Disassembly (cont.) Part Three: Glove Box Removal (Optional) If the vehicle is equipped with IO4, IO5 or IO6 radio AND a factory rear camera, follow the steps below to remove the glove box.
  • Page 6 AMHGM1K AERPRO AERA10D Radio Replacement Kit for select 2014-2019 Silverado/Sierra Truck Section 1: Disassembly (cont.) Part Four: A Pillar Removal Step 1 Step 3 Step 2 Remove the inserts covering the Pull the trim panel to release the Remove the two 10mm bolts.
  • Page 7 Apple CarPlay, Android Auto require access to a USB port. The SSUSB2 is designed to extend the USB ports on the back of the AERA10D to where they are accessible once the radio is installed. For this installation, the factory 12V power outlet will be replaced with the SSUSB2. You may chose to follow these steps, or mount the USB port somewhere else in the vehicle.
  • Page 8 AMHGM1K AERPRO AERA10D Radio Replacement Kit for select 2014-2019 Silverado/Sierra Truck Section 2: In-Vehicle Harness Connections and Preparation (cont.) Part Two: Factory Rear Camera Retention Harness (CAM-GM51-HAR) If the vehicle is equipped with IO4, IO5 or IO6 radio AND a factory rear camera, follow the steps below to install the factory camera retention harness behind the glove box.
  • Page 9 Part Four: GPS & DAB+ Antennas The GPS antenna is required for proper operation of Apple CarPlay and Android Auto, in addition to the optional GPS if installed. The GPS antenna is included in the AERA10D hardware. DAB+ Step 2...
  • Page 10 AMHGM1K AERPRO AERA10D Radio Replacement Kit for select 2014-2019 Silverado/Sierra Truck Section 2: In-Vehicle Harness Connections and Preparation (cont.) Part Five: Vehicle Side Plug Relocation and Antenna Adapter Step 2 Step 3 Step 1 Unplug the Green and Gray or Mustard and Gray (IOB)
  • Page 11 AMHGM1K AERPRO AERA10D Radio Replacement Kit for select 2014-2019 Silverado/Sierra Truck Section 3: Interface and Main Harness Connections and Preparation Part Two: Main Harness Connections (AMHGM1K-HAR-A) Step 4B Step 5 Step 4A Plug the 6-pin lead on the Main For IO3, IO4, IO5 and IO6 radios, For IOB radios, connect the white Harness into the RPA-VA1.
  • Page 12 AMHGM1K AERPRO AERA10D Radio Replacement Kit for select 2014-2019 Silverado/Sierra Truck Section Four: Display Mounting Panel Preparation Part One: Transferring the Climate Controls Step 1 Step 2 Step 3 With the factory radio display / Once all the clips are released,...
  • Page 13 AMHGM1K AERPRO AERA10D Radio Replacement Kit for select 2014-2019 Silverado/Sierra Truck Section Five: Radio Module Preparation Part One: Radio Module Side Brackets 90° Bend Spacer Bracket Step 1 Step 2 Step 3 Save the cut off end pieces; they From the AERA10D hardware, Align one of the 90°...
  • Page 14 SWC lead (3). Step 5 Step 3 Step 4 Temporarily place the RP5-GM51 Plug in the AERA10D’s 16 pin module inside the CD/DVD Plug in the two USB cables (1) Main Harness (1) and 24 pin A/V cavity while making the following and the GPS antenna (2).
  • Page 15 AMHGM1K AERPRO AERA10D Radio Replacement Kit for select 2014-2019 Silverado/Sierra Truck Section 5: Radio Unit Installation (cont.) Part One: In-Vehicle Harness and Cabling Connections (cont.) Step 6 Step 7 Connect the radio side of BAA22 2018-19 IOB Only: Plug the 20...

  • Page 16: Technical Support

    Android Auto Camera(s) Plug the two display cables into Place the mounting panel in place the back of the AERA10D display. * The Chime Module has a 4 and temporarily secure it with two Re-connect the factory climate position volume selector on the 7mm screws.