Aerpro AMHJP2K Manual

AMHJP2K
Introduction and Features
The AMHJP2K is a complete radio replacement kit with integrated climate control retention for select Jeep Wrangler JL
and Jeep Gladiator JT vehicles. All modules and cables are included to retain important features of the factory
system, including: steering wheel-mounted radio controls, factory reverse camera, USB ports, and AM/FM reception.
Data integration with the vehicle and the Aerpro AERA10D radio allows for the retention and addition of the
following features: vehicle performance gauges and information, climate controls, vehicle settings, factory amplifier
control, and forced camera activation. Simplified installation and setup menus allow direct programming of camera
triggers, steering wheel controls, and other settings of the radio and CH4A-JW18 interface. See Important Notes
(next section) for additional information.
Plug & Play wiring harnesses and cables allow for quick and easy installation without the need to cut or splice any
wiring.
Important Notes
We recommend reading this manual thoroughly to familiarize yourself with the entire process
1. Does Not Retain:
Cluster Display Features
• Compass (when equipped with 7" or 8.4" screen)
• Clock
• Phone pop-ups
• Navigation pop-ups
Factory Amplifier Features
• Speed Controlled Volume
2. When connected properly, the USB port inside the center console will function for Apple Carplay/Android Auto, and all
other USB ports will be used for USB thumb drives and charging only.
3. When connecting an HDMI streaming device to the RPA-HD1, use an HDMI extension cable to position it away from the
module to ensure proper functionality. We recommend placing the HDMI device in the glove box. Failure to follow the
directions may result in module malfunction.
Tools Needed; Included Components
Tools needed for installation: 7mm socket, 10mm socket, ratchet,
ratchet extension, T20 torx screwdriver, T25 torx screwdriver,
pick tool or small flathead screwdriver, plastic panel removal tool.
1. AERA10D Display Mounting Panel
2. 18" Data Harness (10P-2-10P-18)
3. CAN-Bus Connection Harness (MQS4PT-36)
4. Radio Module Mounting Brackets
5. Chime Speaker Mounting Accessories
6. Screen Panel Clips and Mounting Bracket Screws
7. External Chime Speaker
8. 7' USB Port Retention Adapter (USB-UN2)
9. AM / FM Antenna Adapter (BAA22)
10. 8" USB Hub Retention Adapter (USB-UN1)
11. 6" Data Harness (10P-2-10P-6)
12. PAC-LINK Interface Module (PL1)
13. HD Camera Retention Module (RPA-HD1)
14. Radio Replacement Interface Module
(CH4A-JW18)
15. 12" HDMI Cable
16. Main Wiring Harness (RPK-JW18-HAR)
prior to beginning the installation.
Aerpro AERA10 Radio Replacement Kit for Jeep
Wrangler JL and Jeep Gladiator JT Vehicles
2
3
9
4
10
11
15
12
13
16
1
5
6
7
8
14
Page 1