Related Manuals for EMTOP SBC-IMX8MP
Summary of Contents for EMTOP SBC-IMX8MP
- Page 1 Quick Start Guide Quick Start Guide www.emtop-tech.com https://github.com/EMTOP-TECH/SOM-IMX8MP sales@emtop-tech.com support@emtop-tech.com...
- Page 2 Quick Start Guide Revision History Date Version Description 2023/06/13 V1.0 First Released 2023/07/01 V1.1 Check And Correction www.emtop-tech.com https://github.com/EMTOP-TECH/SOM-IMX8MP sales@emtop-tech.com support@emtop-tech.com...
- Page 3 Quick Start Guide 1.Prepare SBC-IMX8MP Support SSH or Serial to get debug information 1xSBC-IMX8MP Must 1x12V@2A Power Adapter Must 1xUSB Type C Cable (Connect to Serial Interface ) Must PC(Windows with Putty or other serial /SSH Tool) ...
- Page 4 If you work under Windows system, please run Tools/win32diskimager to write the IMX8MP-BASEBOARD-Yocto-SD-REVXX.img into TF Card. If you work under Linux system, please use dd command to write it into TF Card. Default output device is hdmi. Display Image Name Supported IMX8MP-BASEBOARD-Yocto-SD-REVXX.img HDMI www.emtop-tech.com https://github.com/EMTOP-TECH/SOM-IMX8MP sales@emtop-tech.com support@emtop-tech.com...
- Page 5 After connect the type-c to your pc, check your device manager COM Number Baud rate Choose as 115200 Choose Serial Open You can download drivers or serial/ssh Tools from our github link: https://github.com/EMTOP-TECH/SOM-IMX8MP 5. Debug From SSH The Board default enable SSH,default name is imx8mpevk,default user is root. Password is:root www.emtop-tech.com https://github.com/EMTOP-TECH/SOM-IMX8MP...
- Page 6 Quick Start Guide Output Device Select The board support 3 kinds output device.lvds/hdmi/mipi-dsi You can find below dtb file under TF/EMMC boot Partition emtop-imx8mp-baseboard-hdmi.dtb HDMI Output emtop-imx8mp-baseboard-mipi-dsi.dtb MIPI-DSI Output emtop-imx8mp-baseboard-lvds.dtb LVDS Output Select output device Under Windows: You can check the file u.Env.txt from the TF card boot Partition Remove the #.
- Page 7 Selete Output device from board System Boot up from EMMC $sudo nano /run/media//mmcblk2p1/u.Env.txt System Boot up from TF Card $sudo nano /run/media/mmcblk1p1/uEnv.txt Remark: Boot from emmc, the device is /mmcblk2p1/ Boot from TF card, the device is /mmcblk1p1/ www.emtop-tech.com https://github.com/EMTOP-TECH/SOM-IMX8MP sales@emtop-tech.com support@emtop-tech.com...
Need help?
Do you have a question about the SBC-IMX8MP and is the answer not in the manual?
Questions and answers