Attaching The Base - Samsung SyncMaster 76BDF User Manual

23
User's Manual
Setup

2. Attaching the Base

If your monitor was supplied with the base detached, attach the base as follows.
Remove the twist-tie before attaching the base to the monitor.
2. Align the tabs on the base with the corresponding
1. Place the monitor upside-down on a flat
slots on the bottom of the monitor.
work surface.
Do not bend the snap.
3. Press the base onto the monitor until the tabs 4. Push the base toward the front of the monitor
are fully engaged in the slots. until the release latch clicks into the locked position.
Note: The Base will align with the monitor slots in only one position.