OSP Home Furnishings CONTEMPO CNT42 Assembly Instructions

42” desk

November, 2019

CNT42

CONTEMPO 42" DESK

Assembly Instructions - Important:

Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when

assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or

information on other products, please visit our website: www.officestar.net or call or write us.

Table of Contents

Do you have a question about the CONTEMPO CNT42 and is the answer not in the manual?

Page 1 November, 2019 CNT42 CONTEMPO 42” DESK Assembly Instructions - Important: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or information on other products, please visit our website: www.officestar.net or call or write us.
Page 2 LIMITED WARRANTY OSP Home Furnishings™ warrants to the original purchaser that this product will be free from defects in material and workmanship as described below. OSP Home Furnishings™ will repair or replace, at its option, without charge to the original purchaser only, defective products or parts for one (1) year from the date of purchase.
Page 3 3. Rename all English discriptions to French discriptions. PARTS (A) Top (1 PC) (B) Left Frame (1 PC) (C) Right Frame (1 PC) (D) Front Upper Support (1 PC) (E) Rear Upper Support (1 PC) (F) Lower Support (1 PC) HARDWARE LIST DRAWING DESCRIPTION...
Page 4 STEP 1 DO NOT FULLY TIGHTEN BOLTS. STEP 2 FULLY TIGHTEN ALL BOLTS.
Page 5 STEP 3 IF NEEDED, ADJUST LEVELERS TO LEVEL.