Related Manuals for Milwaukee M12 C4PLA
Summary of Contents for Milwaukee M12 C4PLA
- Page 1 OPERATOR'S MANUAL Cat. No. M12 C4PLA M12™ CROSS + 4 POINTS LASER WARNING To reduce the risk of injury, user must read and understand operator's manual.
- Page 2 Maintain labels and nameplates. These carry • • Keep children and bystanders away while operat- important information. If unreadable or missing, ing a power tool. Distractions can cause you to lose contact a MILWAUKEE service facility for a ® control. replacement.
-
Page 3: Specifications
10. Nail/Screw hole Recharge only with the charger WARNING SPECIFICATIONS manual supplied with your charger and battery. Cat. No..........M12 C4PLA Volts............12V DC Removing/Inserting the Battery Battery Type ..........M12™ To remove the battery, push in the release buttons Charger Type..........M12™... -
Page 4: Operation
•Once the level is mounted, use the micro adjustment cold, allow at least 2 hours to acclimate to ambient temperature before turning on the tool. If problem persists, please contact a MILWAUKEE ® OPERATION service facility for support. - Page 5 Horizontal Leveling Accuracy free measuring space approximately 10 m x 10 m on a firm surface between two walls or structures A and B is required for the check. It is also suggested to mount the Laser Level to a Tripod for easy adjustment.
-
Page 6: Maintenance
MAINTENANCE reduce risk of injury, always WARNING remove battery before perform ing any maintenance. Never disassemble the tool. Maintain Laser Level Maintain tools. If damaged, have the tool repaired before use. Accidents may be caused by poorly maintained tools. To reduce the risk of personal WARNING 10 m injury... - Page 8 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the M12 C4PLA and is the answer not in the manual?
Questions and answers