Related Manuals for Milwaukee M12 3PLA
Summary of Contents for Milwaukee M12 3PLA
- Page 1 OPERATOR'S MANUAL Cat. No. M12 3PLA M12™ 360° 3-PLANE LASER WARNING To reduce the risk of injury, user must read and understand operator's manual.
- Page 2 Do not charge non-rechargeable WARNING batteries. manufacturer. A charger that is suitable for one type SPECIFICATIONS with another battery pack. Cat. No..........M12 3PLA • Volts............12V DC battery packs. Use of any other battery packs may Battery Type ..........M12™ Charger Type..........M12™...
- Page 3 Power Save Mode enabled.* End of charge. 4 times & tool Charge the battery pack. Magnets will not run System error. Tool shuts off. Contact a MILWAUKEE service ® alternately facility. Read operator’s manual Regulatory Compliance Mark (RCM). This product meets...
- Page 4 -10°C WARNING to 40°C before turning on the tool. Do not look directly into laser If problem persists, please contact a MILWAUKEE ® apertures. Power on indicator will display, and service facility for support. horizontal level line will immediately be emitted from aperture in the laser housing.
- Page 5 Laser Level and before exposure to jobsite conditions. See "Accuracy Field Check" for information. Should any deviation from listed product accuracy be found, please contact a MILWAUKEE service facility. ® Failure to do so could result in rejection of warranty claim.
- Page 6 Vertical Leveling Accuracy The maximum vertical deviation (d) is: d max = 2XH (door opening) x ±3.18mm ÷ 10m A door opening with approximately 2.5m of space Example: for a door opening height of 2.13m, on each side of the opening is required for this the maximum permitted deviation (d) is: check.
- Page 8 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the M12 3PLA and is the answer not in the manual?
Questions and answers