ENGLISH
SERVICE MANUAL
ELECTRICAL SYSTEM
DRIVE SYSTEM ELECTRONIC BOARD REPLACEMEN
1.
Drive the machine on a solid and level ground and engage the parking brake with the lever (23).
2.
Turn the ignition key (2) to "0" and remove it.
3.
Open the hood (26) and engage the hood support rod (60).
4.
Disconnect the battery connector (63).
5.
Remove the screws (B), then move the fuse panel (A) carefully.
6.
Disconnect the connections (C, D, E, F, G, H, I) from the drive system electronic board (J).
7.
Remove the nuts (K), then remove the drive system electronic board (J).
8.
Install the new electronic board in the reverse order of removal.
52
1464380000(1)2009-11
B
A
RSW 37
S300837