FLUENCE VYPR 2 Series User Manual page 9

CAUTIONS & WARNINGS
CHEMICAL EXPOSURE PRECAUTION
Fluence lighting systems are designed to be resilient against crop protection products . Many chemicals used in the Commercial Horticultural
Industry are corrosive to electronic equipment . If the luminaire is accidentally exposed to a corrosive liquid or vapor (e .g . VOC –Volatile Organic
Compound and H2S – Hydrogen Sulfide) the luminaire must be rinsed with clean water as soon as possible . The product warranty will no longer
apply if the product is exposed or remains in the corrosive environment . It is recommended the luminaires be removed and protected from the
corrosive environment during all periods of disinfection or sanitization of the facility .
CALIFORNIA PROPOSITION 65 WARNING
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm . For more
information: www .P65Warnings .ca .gov .
PHOTOBIOLOGICAL HAZARD
To prevent eye damage, avoid looking directly at the unshielded LEDs . Practice safety precautions recommended by (IEC 62471 and IEC TR 62778) for
photobiological Risk Group 1 .
ETL Rating: VYPR Series fixtures are rated suitable for wet locations . A "wet location" is defined as an interior or exterior location in which water or other
liquids may drip, splash or flow on or against the electrical components of a lighting fixture . VYPR Series fixtures and power supply are certified to meet UL
standards (ETL) from the Intertek safety consulting and certification company . Systems are cETL listed and are rated IP66 by IEC standard 60529 .
The light source of this luminaire is not replaceable; when the light source reached its end of life the whole luminaire shall be replaced .
Horticulture Lighting, not suitable for household room illumination .
1 PPF calculations compiled using integrating sphere measurements and typical spectroadiometric data for each LED to determine typical fixture performance . Actual photometric results may vary
within the LED manufacturer's bin tolerance .
2 Wattage values are typical expected values . Fluence maintains a tolerance of ±10% on flux and power specifications . Target light levels can vary from projected levels depending on ambient
temperature, room reflections values and dirt accumulation .
9