Typical Installation - Little Giant HT-10EN-CIM Owner's Manual

Risk of damage to pump or other equipment.
• Do not use this pump for pumping sea water, beverages, acids, chemical solutions, or any other liquid that pro-
motes corrosion as this can result in damage to the pump.
• Do not run pump dry. For optimal cooling and to prolong the motor life, the liquid level being pumped should nor-
mally be above the top of the pump housing.
• This pump is not suitable for pond applications.
INSTALLATION

Typical Installation

1 Pump
2 Basin Cover
3 Vent Pipe
4 Power Cord Grommet
5 Discharge Pipe
6 Pump Power Cord
7 Outlet
8 Gate Valve
9 Check Valve
10 Union
11 Gas Tight Basin
12 Tethered Float Switch
13 ON Level
14 OFF Level
5
4
3
2
12
1
INSTALLATION
Typical Installation
7
6
11
13
14
8
9
10
3