Connecting Other Equipment To Your Dvd-Vcr; Plug & Auto Set Up - Samsung CHT-1010 Instruction Manual

Connecting Other Equipment to Your DVD-VCR

GB
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
➢
The RCA input/output connectors on the rear of the DVD-VCR are used for equipment,
such as camcorders, VCRs or sound systems.
REAR OF THE DVD-VCR
12
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1 Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2 Plug the DVD-VCR into the mains.
Result: The
3 Select the required language by pressing the
4 Press ENTER to store the language selected.
Result: A message appears.
Camcorder
5 Press ENTER to start the auto scanning.
N The number of stations automatically stored by the DVD-VCR
depends on the number of stations that it has found.
6 Check the data and time. (see page 17)
VCR
7
On completion, press RETURN to exit the menu.
➢
Auto preset can be performed by pressing I (STOP) on
the VCR continuously for 5 seconds or more with no
Sound system
tape inserted.
LANGUAGE SET menu is displayed.
or buttons.
œ ❷
GB
TV
2
AUTO SET UP
PLEASE WAIT
60%
I I I I I I I I I I I I
I -------I
RETURN
CLOCK SET
12:01 1/JAN/2003
WED
➛¤❿¤¤¤
RETURN œ ❷
13