Table of Contents
Advertisement
VCR
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the
GB
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
MAIN MENU
➢
N
N
USER SET
➛¤¤¤❿
RETURN
ENTER
œ❷¤¤
1
USER SET
2
AUTO
COLOUR SYSTEM
:AUTO
PAL
NICAM
:ON
MESECAM
3
IPC
:ON
B/W
AUTO POWER OFF
:OFF
LINE3 AUDIO
:RCA
4
➛¤❿
œ ❷¤¤
RETURN
5
6
VCR
NICAM
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
MAIN MENU
Please refer to page 34.
1
USER SET
2
➛¤¤¤❿
RETURN
œ❷¤¤
ENTER
3
4
USER SET
5
COLOUR SYSTEM
:AUTO
ON
NICAM
:ON
OFF
IPC
:ON
AUTO POWER OFF
:OFF
LINE3 AUDIO
:RCA
➛¤❿
œ ❷¤¤
RETURN
6
24
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
Press the corresponding
œ
,
❷
USER SET
option.
Press the ENTER button to select this option.
Result:
The
USER SET
menu is displayed.
Press the corresponding
œ
or
❷
buttons, until the
COLOUR
SYSTEM
option is selected.
Press the ❿ button to select
➝
➝
➝
AUTO
PAL
MESECAM
B/W
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W
Black and White
On completion, press RETURN twice to exit the menu.
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
Press the corresponding
,
œ
❷
USER SET
option.
Press the ENTER button to select this option.
Result:
The
menu is displayed.
USER SET
Press the corresponding
œ
or
❷
buttons, until the
NICAM
option
is selected.
Press ➛ or ❿, until...
To...
Mono mode
OFF
is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode
is displayed.
ON
ON: Normally set at this position.
On completion, press RETURN twice to exit the menu.
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the SETUP button on the remote control.
Result:
The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding
,
œ
❷¤
USER SET
option.
3
Press the ENTER button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
buttons, until the
œ
❷
selected.
Press the ❿¤button to select the IPC (intelligent picture control)
5
option.
➢
When intelligent picture control mode is
of the image is adjusted automatically.
6
To adjust the sharpness manually, press the
IPC mode
OFF
.
Press the ➛ or ❿ buttons until the picture is displayed according to
7
.
your preferences.
➢
If you do not press a button within ten seconds, the
PICTURE
menu disappears automatically.
8
On completion, press the RETURN button again.
VCR
MAIN MENU
USER SET
➛¤¤¤❿
RETURN
œ❷¤¤
ENTER
IPC
option is
USER SET
COLOUR SYSTEM
:AUTO
NICAM
:ON
ON
, the sharpness
IPC
:ON
AUTO POWER OFF
:OFF
LINE3 AUDIO
:RCA
❷
button to turn the
➛¤❿
œ ❷¤
RETURN
25
GB
ON
OFF
Advertisement
Table of Contents
