Presetting The Stations Manually; Clearing A Preset Station - Samsung CHT-1010 Instruction Manual

VCR

Presetting the Stations Manually

☛
GB
MAIN MENU
1
2
INSTALLATION
3
➛¤¤¤❿
RETURN œ❷¤¤ ENTER
4
5
INSTALLATION
AUTO SET UP
MANUAL SET UP 6
TV SYSTEM :G
VCR OUTPUT CH :CH36
7
RETURN œ ❷¤¤¤¤ ENTER
8
9
TV STATION TABLE
PR CH NAME
1
10
2
3
4
11
5
❿¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
œ ❷ SWAPPING:ENTER
RETURN DELETE:CLEAR
MANUAL TUNING
12
PR :
CH : ---
MFT : -
NAME : ----
➛ ❿¤¤¤
œ ❷¤¤¤ MEMORY:ENTER
RETURN
13
14
☛
20
You do not need to preset the stations manually if you
have already set them automatically.
Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
or ➛, ❿ buttons to select the
Press the corresponding ,
œ ❷
INSTALLATION option.
Press the ENTER button to select this option.
Result: The menu is displayed.
INSTALLATION
Press the corresponding œ or ❷ buttons, until the MANUAL SET
UP option is selected.
Press the ENTER button to select a MANUAL SET UP option.
Result: The TV STATION TABLE menu is displayed.
Press the œ or ❷ buttons to select a programme number as
required.
Press the ❿¤button to preset the station.
Result: The MANUAL TUNING menu is displayed.
Press the ➛ or ❿ buttons to start scanning.
Result: The frequency band is scanned and the first station
found is displayed.
Press the œ or ❷ buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
To change the programme's name, press the ❿¤button.
Result: The first letter of the name flashes.
To... Then...
Select a character Press the œ or ❷ button until the
in the name required character is displayed
(letters, numbers or "-" character).
Press the ❿ or ➛ buttons
Move to the next or
previous character respectively.
If you... Then...
Wish to store the N Press the œ or ❷¤ buttons until the MFT
station displayed is selected.
Press the ➛ or ❿ buttons to adjust the
N
picture, if necessary.
N
Press ENTER to store the station
Do not wish to N Press the œ or ❷ buttons until the
store the station CH is selected.
Press the ➛ or ❿ buttons to go on
displayed N
scanning the frequency band and display
the next station
N Go back to the beginning of Step 12
6
Repeat this procedure from Step onwards, until all the required
stations have been stored.
On completion, press the RETURN button three times to exit the
menu.
You do not need to preset the stations manually if you
have already set them automatically.

Clearing a Preset Station

If you have stored a TV station:
N That you do not require
N At the wrong programme position
you can cancel it.
1
Press the SETUP button on the remote control.
or ➛, ❿ buttons to select the
2 Press the corresponding ,
œ ❷
INSTALLATION option.
3 Press the ENTER button to select this option.
Result: The menu is displayed.
INSTALLATION
4
Press the corresponding œ or ❷ buttons, until the MANUAL SET
UP option is selected.
5
Press the ENTER button to select this option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding œ or ❷ buttons, until the required preset
TV station is selected. ( PR )
7 Press the CLEAR button.
8 6
Repeat the same procedure from Step onwards until all the
required stations have been cleared.
9
On completion, press the RETURN button three times to exit the
menu.
VCR
GB
MAIN MENU
INSTALLATION
➛¤¤¤❿
RETURN ENTER
œ❷¤¤
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN œ ❷¤¤¤¤ ENTER
TV STATION TABLE
PR CH NAME
1 003
2
3
4
5
❿¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
œ ❷ SWAPPING:ENTER
RETURN DELETE:CLEAR
21