Miller Dynasty 300 SD Owner's Manual page 5

Declaration of Conformity For
European Community (CE) Products
NOTE
Manufacturer:
Miller Electric Mg. Co.
1635 W. Spencer St.
Appleton, WI 54914 USA
Phone: (920) 734-9821
European Contact Signature:
Declares that the product:
conforms to the following Directives and Standards:
Machinery Directives: 98/37EEC, 91/368/EEC, 92/31/EEC, 133/04, 93/68/EEC
Arc Welding Equipment − Part 10: Electromagnetic Compatibility (EMC) Requirements.
Arc Welding Equipment − Part 1: Welding Power Sources. IEC 60974-1 Ed. 2.1
Degrees of Protection Provided By Enclosures (IP Code): IEC 60529 Ed. 2.1
dec_stat_Ref 2/04
This information is provided for units with CE certification (see rating label on unit.)
Dynasty
Low Voltage Directive: 73/23/EEC
Electromagnetic compatibility Directives: 89/336/EEC, 92/31/EEC
IEC 60974-10 August 2002
Insulation Coordination For Equipment Within Low-Voltage Systems:
Part 1: Principles, Requirements And Tests. IEC 60664-1 Ed. 1.1
European Contact:
Mr. Danilo Fedolfi,
Managing Director
MILLER Europe S.r.l.
Via Privata Iseo 6/E
20098 San Giuliano
Milanese, Italy
Phone: 39(02)98290-1
Fax: 39(02)98290203
300 SD, DX, LX
®
Directives
Standards