Mani Palmyra MIR-1017 Owner's Manual page 3

SETTING UP
Step 1- Switching on the radio;
Plug the cable from the AC adaptor into the socket labeled 9V DC on the back of the
radio, then switch on at the mains.
Caution: Use only the mains adaptor supplied with the radio. Connecting a power
supply with a different rating will cause permanent damage to the radio and may be
hazardous.
The display on the front of the radio will light up and say:
R e c i v a R a d i o
A R M P o w e r e d
after a few seconds, this will change to show:
C o n n e c t i n g t o
N e t w o r k
Step 2 Connect to the network;
Note: At first, you need to select network;
(1)Press the SELECT button;
(2) Turn the dial until the display says "Configure";
C o n f i g u r e
(3) Press the SELECT button;
(4)Turn the dial until the display says "Network Config";
N e t w o r k C o n f i g
(5)Press the SELECT button;
(6)Turn the dial until the display says "Wired/Wireless";
W i r e d / W i r e l e s s
-2-