Mani Palmyra MIR-1017 Owner's Manual page 17

If your wireless network name(ESSID) is 'Hidden'(a setting on the
wireless access point), then you can either turn on the name, or you can manually
enter the name into the internet radio and media player, Select Configure, Select
network, Enter ESSID. Confirm if the Network is encrypted, e.g. requires a WEP or
WPA key, then enter the network name.
2.If your radio can connect to the network successfully, but is unable to play
particular stations, it may be due to one of the following reasons:
The station is not broadcasting at this time of the day (remember it may be located in a
different time zone).
The station has too many people trying to attach to the radio station server and the
server capacity is not large enough.
The station has reached the maximum allowed number of simultaneous listeners. The
station is not broadcasting anymore.
The link on the radio is out of date. This is updated automatically every day, so the next
time you turn on the link will be recognized.
The internet connection between the server (often located in a different country) and you
is slow. Some internet service providers may fail to stream in certain geographical areas.
Try using a PC to play back the stream via the broadcaster's web sit. If you can play
back the station with a PC, use the form athttp://www.reciva.com/station/add_station.asp
to notify us so that we can change the station data that is used by the radio.
If you have a laptop, try connecting it if your Internet Radio cannot find the station.
3.When you scan for PCS none can be found, or the PC you are looking for does
not appear in the list:
Global File sharing is not enabled on the PC.
The PC you are looking for is in another part of the network separated by
a router.(This may happen if you have two access points on the same network, and the
Media source is on one Access Point and the internet Radio is on another).
The PC with the Media content may not have the same workgroup as the server
managing the network. The easiest solution is to change the PC workgroup name to
he same as that being supported by the server.
You have not connected to the wireless Access point. On the internet radio , select
'Configure', 'Network Configure', 'Select Network', 'Scan'
and then select your Wireless network. (You may need to enter a security key to access
the network wirelessly).
You have not enabled simple file sharing on Windows 2000. In Windows
200 the simple file sharing can be turned on by going to the Control Pane,
selecting Folder options, view T ab. The safest way for users to enable the service is to
run the 'Set up a home or small office network' wizard from Control Panel, Network
Connections.
You have a firewall set on your PC which is stopping you accessing shared files.
Windows 2K doesn't come with a real firewall so unless you have installed one this
should not be a problem.
You have a third party firewall in your network, which is preventing file sharing.
-16-