Operation; Mode Selection; Setting Temperature - Danfoss GreenCon RC-C2 Installation Manual

Installation Guide

7. Operation

1. Power On/Off and Eco mode.
• When powered off, press power button on top of
GreenCon to turn on;
• When powered on, press power button for 2 sec-
onds to turn off thermostat;
• When powered on, short press power button to
enter ECO mode;
• In ECO mode, press" < " or" > " for temperature
setting, short press power button to exit.

2. Mode selection

• Press " M " to change system working mode:
Cooling "

3. Setting temperature

• Press " < " to reduce temperature, press " > " to raise
temperature. (0.5°C changed each press)
• During setting temperature, " SET " icon will be dis-
played, after setting finished, this icon disappears
and LCD shows actual temperature.
4. Fan speed selection
• Press " " to select
(Med),
• In Auto mode, fan speed will change according to
the difference between room temperature and set-
ting temperature, Low-speed when this difference
exceed 1°C, Med-speed when exceed 2°C, Hi-speed
when exceed 3°C.
*In default setting, fan speed will be "Close" when
Danfoss Heating Solutions
GreenCon RC-C2/C4
", heating "
(close)
(Hi), (Auto);
VIE2C32P
" or ventilation "
(Low),
GB
"
7