Table of Contents
Advertisement
03_GettingStarted.fm Page 24 Wednesday, August 3, 2005 3:23 PM
Attaching the Side Connector Cover
1 Place the loop (attached to the side connector
cover) over the antenna; then slide it
downward until it touches the top of the radio.
2 Insert the tab on the top of the cover into the
slot above the connector.
3 Position the cover over the connector and
align the thumbscrew with the threaded hole
in the radio.
4 Tighten the thumbscrew to hold the cover in
place. Do not overtighten the thumbscrew.
24
English
All manuals and user guides at all-guides.com
Antenna
Loop
Slot
Thumbscrew
TURNING THE RADIO ON OR OFF
ON
Turn the On/Off/
Volume knob
clockwise.
If power-up is suc-
cessful, you hear the
Self-Test Pass Tone
and see the LED
momentarily turn
green.
If the radio fails to
power up, you hear
the Self-Test Fail
Tone
.
OFF
Turn the On/Off/
Volume Control knob
counterclockwise until
you hear a click.
Advertisement
Table of Contents
