Attaching the Side Connector Cover
1 Place the loop (attached to the side connector
cover) over the antenna; then slide it
downward until it touches the top of the radio.
2 Insert the tab on the top of the cover into the
slot above the connector.
3 Position the cover over the connector and
align the thumbscrew with the threaded hole
in the radio.
4 Tighten the thumbscrew to hold the cover in
place. Do not overtighten the thumbscrew.
34
English
TURNING THE RADIO ON OR OFF
Antenna
Loop
Slot
Thumbscrew
ON
Turn the On/Off/
Turn the On/Off/
Volume knob coun-
Volume knob clock-
terclockwise until you
wise.
hear a click.
If power-up is suc-
cessful, you hear the
Self-Test Pass Tone
and see the LED
momentarily turn
green.
If the radio fails to
power up, you hear
the Self-Test Fail
Tone
.
OFF