Table of Contents
Advertisement
Chapter 1
Introduction
ANT1 and ANT2 Ports
GPS Port
DC/ETH Ports
F/O Port
4
N-type female ports for connecting RF (Radio Frequency) antennas. Use only RG-6 or RG-9
coaxial cables.
A TNC female port for connecting the GPS antenna.
A Power-over-Ethernet (PoE) port for supplying power to the base station and connecting it
to the network.
For SFA and SFD models only.. An LC (Lucent Connector) port for connecting to the
network via a 1000Base-LX fiber optic Ethernet cable.
RUGGEDCOM WIN7035
Installation Guide
Description
Advertisement
Table of Contents
