Barco SLM R6 Executive Owner's Manual page 71

Service Mode
How to change the password ?
To change the password for all the levels can be done as follow (only when owner) :
1 Push the cursor key é or ê to highlight 'Change password' (menu 1).
2 Press ENTER to display the Change password menu (menu 2). Only possible when 'owner'.
The old passwords are displayed.
3 Push the cursor key é or ê to highlight the password which must be changed.
4 Press ENTER to select.
Enter the new password with the numeric keys of the RCU or local keypad.
5 Select the next password or press ENTER to save the changes.
Press ENTER to save the passwords.
Press EXIT to return without saving the new passwords.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
LAMP
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Access Control List
In the access control list the owner can set up the access possiblities for the user and the guest.
To set up an access control list, handle as follow :
1 Push the cursor key é or ê to highlight 'Change password' (menu 1).
2 Press ENTER to display the Change password menu (menu 2). Only possible when 'owner'.
3 Push the cursor key é or ê to highlight 'Access Control List' (menu 2).
4 Press ENTER to display the Access Control List menu (menu 3).
For each item an access possibility can be set for owner, user, guest or everybody.
To change an access possibility :
1 Push the cursor key é or ê to select an item in the scroll list.
2 Press ENTER to select.
3 Push the cursor key ç or è to select owner, user, guest or everybody.
4 Press ENTER to toggle between Y (yes) or N (no).
5 Repeat both steps if necessary.
6 Press EXIT to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
LAMP
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
An access level can be added to the following items :
Adjustment mode
Barco logo
Change projector address
File delete
File delete all
Input balance
Installation
Random access
Serial communication
Service
All manuals and user guides at all-guides.com
CHANGE PASSWORD
Enter new password
OWNER 0000
USER 0000
GUEST 0000
ACCESS CONTROL LIST
Select with é or ê
then <ENTER>
Reprogram with é, ê,ç, è
or numeric keys
<ENTER> to confirm
<EXIT> to return.
menu 2
CHANGE PASSWORD
Enter new password Menu
OWNER 0000
USER 0000 Adjustment mode
GUEST 0000 Barco logo
Change Proj. Address
ACCESS CONTROL LIST .
.
Select with é or ê
then <ENTER>
O= Owner; U=User; G=Guest; E=Everybody
Reprogram with é, ê,ç, è
or numeric keys
<ENTER> to confirm
<EXIT> to return.
menu 2
menu 3
ACCESS CONTROL LIST
O U G E
Y Y Y Y
Y - - -
Y Y - -
Select with é or ê
<ENTER> to toggle
<EXIT> to return.