Table of Contents
Advertisement
Left headlight.
1.
Remove the bulb by turning the bulb
holder upward and then pulling it straight
out.
2. Carefully pry the plastic sleeve by the con-
nector's locking lug to release it.
3. Remove the connector from the bulb.
4. Replace the bulb.
5. Position the bulb in the socket and turn it
downward.
Related information
Location of exterior lights (p. 635)
•
Removing the plastic cover to replace
•
bulbs (p. 634)
Removing the rectangular headlight cover
•
(p. 634)
Bulb specifications (p. 639)
•
Replacing daytime running lights/
front parking light bulbs
The daytime running light/parking light bulbs
in the halogen headlights can be changed
without the help of a workshop.
Before the bulbs can be replaced, the plastic
covering over the headlight must be removed.
Before the lamp can be replaced, the rectan-
gular headlight cover must be removed.
NOTE
Daytime running lights/parking lights are
easier to reach if the high beam headlight
bulbs are removed. The high beam head-
lights are mounted above and to the side of
the daytime running lights/parking lights.
Remove the high beam headlight bulb by
turning the bulb holder upward and then
pulling it straight out.
CAUTION
Never touch the bulb glass with your bare
fingers. Grease and oils from your fingers
vaporize in the heat and will leave a
deposit on the reflector, which may dam-
age it.
MAINTENANCE AND SERVICE
Left headlight.
1.
Pull the daytime running light/parking
light bulb holder straight out.
2. Remove the bulb by pulling it straight out.
3. Replace the bulb.
4. Position the bulb holder in the socket and
push it into place.
5. If the high beam bulb holder has come
loose, position it in the socket and turn
downward.
Related information
Location of exterior lights (p. 635)
•
Removing the plastic cover to replace
•
bulbs (p. 634)
Removing the rectangular headlight cover
•
(p. 634)
}}
637
Advertisement
Table of Contents
