WHEELS AND TIRES
||
WARNING
The wheel bolts may need to be tightened
again several days after a wheel change.
Temperature fluctuations and vibrations
can cause them to loosen slightly.
NOTE
After inflating a tire, always replace the
•
valve cap to help prevent valve damage
caused by gravel, dirt, etc.
Use plastic valve caps only. Metal caps
•
could corrode and become difficult to
remove.
Related information
Leveling control settings* (p. 438)
•
Hoisting the vehicle (p. 599)
•
Tool kit (p. 560)
•
Saving new reference values for tire infla-
•
tion pressure monitoring* (p. 555)
13
Not available on all models.
560
Tool kit
Tools for e.g. towing or changing wheels are
provided in the vehicle's cargo compartment.
All the tools are located in a foam block under the
cargo compartment floor.
Jack*
Tool for removing the plastic wheel bolt
covers
Funnel for refilling fluids
Wheel bolt key* and towing eyelet
If the vehicle is equipped with a spare tire*
jack and lug wrench are provided.
Related information
Changing a wheel (p. 558)
•
Jack* (p. 561)
•
Tire sealing system (p. 566)
•
Attaching and removing the towing eyelet
•
(p. 462)
13
, a
* Option/accessory.