Fax +1 305 430 9692
OPERATION
Always remove the kettle from the power base (1) before filling it
•
or before any operation.
Open the lid (5) by pressing on the lid opening button (4) and fill
•
the tank with fresh water, paying attention not to fill under the
minimum mark or above the maximum mark indicated on the
glass housing of the kettle (7).
Close the lid by pressing it down until it you hear a click. Make
•
sure it closes correctly.
Make sure the spout filter is well in position, as else the auto-shut
•
off feature might not work.
Put the kettle onto the power base (1), plug into the wall socket,
•
and switch on with the switch on the handle (3). The blue light
ring (8) will come on, indicating that the appliance is operating. If
it does not come on, check if the kettle is correctly positioned on
the base and check if the base is plugged in. Do not open the lid
while the water is heating or boiling.
The cordless water kettle will switch off automatically when the
•
water has boiled. However, you can stop the appliance anytime
by putting the switch in off position or lifting the kettle from the
power base.
CAUTION: Make sure that the lid is closed and the filter is correctly
and securely fitted before switching on the appliance. Failure to do
so will cause the kettle not to switch off.
For instant re-boiling, wait until water has cooled down and
•
switch on the appliance again.
The kettle will not re-boil until the switch is pressed again.
•
The kettle may be stored on the power base when not in use.
•
Always disconnect the power supply when not in use.
•
When pouring a large quantity of hot water, pour slowly and do
•
not incline the kettle past the horizontal line to avoid burns and
injuries.
Copies of the I/B. Please reproduce them without any
changes
except
under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the
frame.
6
Assembly page 6/28
special
instruction
from
Team
Print only
JK 42458 - 120501