Table of Contents
Advertisement
AXIS P1468-XLE Explosion-Protected Bullet Camera
of the device in the circuits concerned and extraneous-conductive-parts. The external
bonding cable shall be 4 mm
Maintenance
The device does not contain any servicable parts. No covers or seals should be removed.
WARNING
It is strictly prohibited to carry out any attempt of repairs other than by approved and
trained personnel.
•
You may only open the device to access the SD card and to connect the cables. Do not
remove the device's front glass for any other reason.
•
Check all mounting fasteners for tightness at a regular interval.
•
To maintain a smooth operation, clean the device regularly. Use water, mild detergent
and a damp cloth.
•
Be careful not to scratch, damage or leave fingerprints on the front glass. This could
decrease image quality. If possible, keep the protective plastic on the front glass until the
installation is completed.
•
Never use harsh detergents, gasoline, benzene, acetone, or similar chemicals.
Battery
The Axis product uses a 3.0 V BR1632 lithium battery as the power supply for its internal real-time
clock (RTC). Under normal conditions this battery will last for a minimum of five years.
Low battery power affects the operation of the RTC, causing it to reset at every power-up. When
the battery voltage is low, a log message will appear in the product's server report.
CAUTION
Do not replace the battery yourself. Contact Axis support if the log message requests a
battery change.
Lithium coin cell 3.0 V batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether
(EGDME), CAS no. 110-71-4.
Further information
•
The user manual is available at axis.com
•
To check if there is updated firmware available for your device, see axis.com/support
•
For useful online trainings and webinars, see axis.com/academy
2
.
6
Advertisement
Table of Contents
