Table of Contents
Advertisement
Remote & Accessories
Connect remote controls or other accessories, such as keyboard, mouse and gamepad, to interact with your
Smart TV with ease.
Connect Remote Control
Connect a Bluetooth remote control
Pair the Bluetooth remote control to the TV after you power the TV on.
Keep the remote control within 3 metres from the TV. Press any button (except power and mic button) to pair.
Note:
Before pairing, check to ensure the Bluetooth function and the Remote Control Auto Pairing function
•
are turned on by pressing
Bluetooth to On, and then select Remote Control Auto Pairing to On.
•
In special cases, press and hold
•
You can choose to close the remote control auto pairing function by pressing
remote control and select
off.
•
This function may not be applicable in some models/countries/regions.
•
If an error occurred while trying to pair the remote control, it could have been caused by interference. Try
to remove what is causing the interference and try pairing again.
•
If an error occurred with the remote control while using sufficiently charged batteries, you can remove the
batteries for 1~2 seconds then insert them once again. Now the remote control should work correctly.
•
The remote control cannot be paired to the TV while the TV is in standby mode.
Use HDMI & CEC
Use the TV remote to control external devices that are connected to the TV by a HDMI cable. The external
devices need to support HDMI & CEC function.
Press
button on your remote control and select
/
Connect an external device through HDMI & CEC function
Press
button on your remote control and select
/
Control.
Allow HDMI devices to control each other.
1. Set CEC Control to On.
2. Connect a HDMI & CEC compatible device to the TV.
3. Turn on the connected external device. The device will be connected to the TV automatically. After
connection is completed, you can access the menu of the connected device on your TV screen using your
TV remote and control the device.
4. When CEC control is enabled and HDMI & CEC compatible external devices are turned off, the TV will
enter the standby mode. The function needs to be supported by the external device.
Connecting to External Devices
button on your remote control to select
/
button to pair.
/
Settings > Network > Bluetooth > Remote Control Auto Pairing to turn it
Settings > System > HDMI & CEC.
Settings > System > HDMI & CEC > CEC
36
Settings > Network >
button on your
/
Advertisement
Table of Contents
