Table of Contents
Advertisement
OPERATING
INSTRUCTIONS
When you are ready to begin cooking and the
Griddler
is positioned on a flat surface, make sure
®
the drip tray, desired plate surfaces and cooking
position(s) are set. Plug your Griddler
electrical outlet and press any button. The LCD will
show the start-up screen for several seconds.
Select Cooking Function:
When GRILL/GRIDDLE is flashing, this indicates you
need to select and confirm your cooking function. To
do so, press the Select button until your desired
function is flashing: Grill/Griddle or Smoke-less Mode.
To confirm your cooking function, press the Confirm
button. The selected cooking function is now
confirmed and no longer flashing.
COOKING IN GRILL/
GRIDDLE MODE
Set Temperature:
After you have confirmed GRILL/GRIDDLE, the words
LOWER, UPPER and the temperature will flash in
sequence. At this point, you have three options for
setting the plate temperatures: Set the lower plate, set
the upper plate or set both plates to be the same
temperature. Press the Confirm button to select the
plate(s) you wish to set the temperature for. Once the
plate(s) have been confirmed, the word LOWER and or
UPPER will go solid and the associated temperature
will start flashing.
To set temperature of either the upper or lower plate,
press the
button to increase temperature or the
button to decrease temperature. This will allow
you to scroll through temperature(s) at 25-degree
increments. When your desired temperature is
flashing, press the Confirm button. If you are only
using one plate to cook, select OFF for the plate
you do not wish to cook on.
Follow the above steps to set the temperature for the
other plate. If you wish to cook on one plate in
SMOKE-LESS MODE, press and hold the Select
button to go back to function Selection mode.
NOTE: If both plates are confirmed, use the
and
button to adjust both temperatures at the
same time.
With the confirmed temperature(s) flashing, your
Griddler
will begin to preheat, and the word(s)
®
LOWER PREHEAT and/or UPPER PREHEAT will
appear for the plate(s) that are in use.
Once set temperature(s) is reached, the unit will beep
3 times. Temperature(s) will become solid and the
word(s) PREHEAT will disappear.
Set Timer:
After your Griddler
the timer will appear in the LCD, flashing 00:00.
• Countdown Timer – To select your cook time to
count down, press the
the
into an
®
or
adjusts in 30-second increments (60:00 max
cooking time).
Add food to the Griddler
to start the timer. If timer is not set within 1 minute of
preheating, the flashing 00:00 will change to _ _ : _ _.
The timer can be activated at any time during the
cooking process by pressing the
set time has elapsed, the Griddler
the timer will begin counting up – this indicates how
much time has elapsed after the cooking time has
expired. Unit will also beep 3 times every 10 seconds
continuously until cooking is stopped. To disable
counting up and beeping, press Confirm button.
• Count-Up Timer – After the Griddler
you will see 00:00 flashing in the LCD. Add food to
the Griddler
will begin counting up from 00:00 (60:00 max
cooking time). If the timer reaches 60:00, the unit
will beep 3 times and then turn off.
Changing Settings:
To change any of your settings (Cooking Function,
Temperature and Time) at any time during use, press
and hold the Select button to scroll through Time,
Temperature and Function continuously, until the
Select button is released. When button is released,
the setting you wish to change should be flashing.
After desired setting is changed and confirmed, the
display will move to the next function.
COOKING IN
SMOKE-LESS MODE
In Smoke-less Mode there are 4 preset food groups:
Beef, Pork, Poultry and Fish. You also have the option
of turning either plate off, which is the default setting.
Food selection:
After you have confirmed SMOKE-LESS MODE, the
button
words LOWER and UPPER will flash in sequence. At
this point you have three options: Set the lower plate,
set the upper plate or set both plates to be the same
food group. Press Confirm to select the plate(s) you
wish to set the food group for. Once the plate(s) have
been confirmed, the word LOWER and/or UPPER
will go solid and the associated food group will
start flashing. If you are only using one plate to cook,
select OFF for the plate you do not wish to cook on.
Follow the above steps to set the food group for the
other plate. If you wish to cook on one plate in GRILL/
GRIDDLE MODE, press and hold the Select button to
go back to function Selection mode.
9
has reached the set temperature,
®
button (increase time) or
button (decrease time). Press and hold the
to adjust in 1 minute increments. NOTE: Timer
, then press the Confirm button
®
and press the Confirm button. Timer
®
or
button. After
will beep 3 times and
®
is preheated,
®
Advertisement
Table of Contents
