10. Make sure the driver disk is in the floppy
drive and type A:\twain\setup in the box.
Note: Replace A with the letter of your
floppy drive.
To:
Do This:
Turn on
Hold Mode button for 3 seconds then release.
Camera
Turn Off
Hold Mode button for 3 seconds then release.
Camera
Change
While pressing the Mode button, press and release
Resolution
the Shutter button.
Delete Last
Press the Delete button once then press the Shutter
Picture
button.
Delete All
Press the Delete button twice then press the Shutter
Pictures
button.
Set Single
While pressing the Mode button, press and release
Shot
the Shutter button until single shot mode is selected.
Set Multi-Shot
While pressing the Mode button, press and release
the Shutter button until multi-shot mode is selected.
Set Video
While pressing the Mode button, press and release
the Shutter button until video mode is selected.
Set Single Shot
While pressing the Mode button, press and release
with Timer
the Shutter button until single shot with timer mode
is selected.
Set Multi-Shot
While pressing the Mode button, press and release
with Timer
the Shutter button until multi-shot with timer mode
is selected.
View % Memory
Press and hold the Delete button for 3 seconds,
Remaining
then release.
All manuals and user guides at all-guides.com
11. Press Start. After it finishes, press OK.
Install MGI Software:
12. Install the MGI Photosuite and MGI
Videowave software by inserting the
Installation CD into your CD-ROM. The
installation will run automatically. Follow the
onscreen instructions to finish the
installation.
320x240 640x480 1024x768
Look For:
Need help?
Do you have a question about the DSC-350 and is the answer not in the manual?