LG WT9DSBP Owner's Manual page 23

Hide thumbs Also See for WT9DSBP:
Table of Contents

Advertisement

Centrifugado (Spin)
Use this option to change the spin strength. When
you press the START/PAUSE button after selecting
this option, the remaining time is indicated on the
display.
NOTE
• Always keep the clothes amount to 2 kg or less
and make sure to redistribute the clothes evenly.
Using Basic Options
Reserva (Delay)
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the POWER button.
2
Select a washing programme.
3
Press the Reserva (Delay) button to set the
required delay ending time.
4
Press the START/PAUSE button.
NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
• Reservation can be made up to 18 hours;
- 1 hour interval up to 3 - 12 hours
- 2 hours interval up to 12 - 18 hours
• This function cannot be set for less than 3 hours.
• To cancel this function, press Reserva (Delay)
button repeatedly until the reservation is
cancelled or press the POWER button to turn off
and on power.
Remojo (Soak)
This option can be selected to wash heavily soiled
clothes by soaking them in water for some time to
loosen dirt and grime.
• Press the Lavado (Wash) button until
icons turn on simultaneously.
Setting
Child Lock
Use Child Lock function to disable the controls.
This function can prevent children from changing
programmes or operating this appliance.
NOTE
• Once this function is set, all buttons are locked
except the POWER button.
• When the controls are locked,
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Temp. and Enjuague
(Rinse) buttons simultaneously for 3 seconds
to activate this function.
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Temp. and Enjuague
(Rinse) buttons simultaneously for 3 seconds
to deactivate this function.
• When this function is deactivated, a beeper
will sound and the remaining time for the
current cycle will reappear on the display.
OPERATION
23
u
and
k
and the
CL

Advertisement

Table of Contents
loading

Table of Contents