Introduction - Hartke VX3500 Owner's Manual

Introduction

Congratulations on purchasing the Hartke VX3500 Bass Amplifier! Although this
unit is designed for easy operation, we suggest you first take some time to go
through these pages so you can fully understand how we've implemented a
number of unique features.
The VX3500 provides 350 watts of power to the built-in 2-way bass speaker sys-
tem. With that kind of power and Hartke's custom designed transducers, includ-
ing 4 x 10-inch low frequency, working with a 1-inch high frequency compres-
sion driver, the VX3500 is EXTREMELY loud and punchy. In addition, the
VX3500 offers a number of additional advanced features, including front-panel
compression and graphic equalizer LED indicators, effects send and return
jacks, an effects send/return balance knob, and a direct output with ground lift
and pre or post EQ selection.
The VX3500 is optimized for use with electric bass instruments, and the front
panel controls in both models are virtually identical. You'll find either to be an
excellent bass amplifier for live performance use in small and medium-size ven-
ues; in addition, the VX3500's advanced pre-amp features makes it ideal for use
in recording environments.
In these pages, you'll find a detailed description of the many features of the
VX3500 bass amplifier, as well as a guided tour through their front and rear
panels, step-by-step instructions for setting up and using each product, detailed
discussions about equalization and compression, and full specifications. You'll
also find a warranty card enclosed—please don't forget to fill it out and mail it so
that you can receive online technical support and so we can send you updated
information about these and other Hartke and Samson products in the future.
SPECIAL NOTE: Should your unit ever require servicing, a Return
Authorization number (RA) is necessary. Without this number, the unit will not
be accepted. Please call Samson Technologies at (516) 932-1062 for a Return
Authorization number prior to shipping your unit. Please retain the original
packing material and, if possible, return the unit in its original carton and pack-
ing materials.
2